Water Quality Meters
Multi-Parameter |
|
Choose
from a range of multi-parameter instruments which are accurate and easy to use.
Long cables available for in-situ measurements.
This feature is especially
helpful for critical DO measurements. Logging instruments available.
Also available is a range
of Single Parameter Instruments.
|
|
RENTAL GUARANTEE
Our meters are CLEANED, CHECKED, CHARGED & CALIBRATED |
|
|
90FLT |
|
TPS 90FLT
pH, DO, Conductivity,
Salinity, Temp, Turbidity
- Multi-parameter field instrument
- Fully submersible sensors
- Fits down a 50mm bore
- Turbidity range 0-1000 NTU
- Data-loggigng 1808 reading (1488 with
extra data input active)
- Waterproof to an IP67 rating
- DO range 0 to 30ppm fresh water
- Salinity range 100ppM to 1000ppK
- Temperature range -10 to 60°C
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
90FLMV |
|
TPS 90FLMV
pH, Conductivity, Dissolved Oxygen, Redox
(ORP), Salinity, Temp.
- Multi-parameter field instrument
- Fully submersible sensors
- Fits down a 50mm bore
- pH range 0 to 14.00 pH
- Conductivity range 200.0uS/cm to 200 mS/cm
- DO range 0 to 30ppm fresh water
- redox range 0+1500mV
- Salinity range 100 ppM to 1000ppk
- Temperature range -10 to 60 deg C
- Waterproof to an IP67 rating
- 5m cables
- Data Logging (DL) version with RS232 downloading
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
TROLL 9500 |
|
In-Situ TROLL®
9500
pH, DO, Cond., Salinity, Temp, Redox (ORP), Turbidity
-
Easy to change batteries (2 x D-cells)
-
Proven reliability Twist-Lock connectors
with fully detachable custom cable lengths. Also extendable!
-
Maximum flexibility – Up to 9 field
replaceable sensors all in less than a 4.7cm diameter.
-
Save time and money by using Quick-Cal
solutions to validate or calibrate in less than 5 minutes.
-
Data logging unit also available – 16
programmable tests/logging modes
-
Memory 4MB (1,000,000 individual
readings)
-
pH * 0-12 pH units
-
ORP *
±1400mV
-
Conductivity * 5-20,000 s/cm
-
TDS *
-
DO * RDO (optical D.O.)
-
Depth * 30psig
-
Turbidity * 0-2000 NTU/FNU
-
SDI-12 Optional with SDI-12 adapter and
one water quality sensor
* Please check with your local office as
unit specifications may vary
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
WP81 |
|
TPS WP81
pH, Conductivity, Salinity, Temp.
- Fully submersible sensors
- Conductivity range 200.0uS/cm to 2,000 mS/cm
- Salinity range 100 ppM to 1000ppk
- pH range 0 to 14.00 pH
- Waterproof to an IP67 rating
- 10m cables
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
WP80D |
|
TPS WP80D
pH, Redox (ORP), Temp.
- Fully submersible sensors
- Dual channel pH and Redox
- Waterproof to an IP67 rating
- pH range 0 to 14.00 pH
- redox range 0+/-1500mV
- Accuracy +/-0.01pH, +/-1mV
- 20m cables
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
Calibration solutions are available for purchase |
|
|
|
|
