|
Other Samplers & Devices |
|
Devices for taking samples from
hard to reach places. Flow probes for taking water flow readings. |
|
RENTAL GUARANTEE
Our meters are CLEANED, CHECKED, CHARGED & CALIBRATED |
|
|
FP201 |
|
Global
Water Flow Probe
Take spot readings with ease
The Flow Probe is an
accurate, lightweight water velocity instrument that is excellent for storm water
runoff studies, measuring flows in streams, rivers, and partially filled pipes. The
probe measures flows up to 8m/sec.
- Measures flows up to 4.5m/sec
- Reach Extendible wading rod, 1.5m to 4m
- Waterproof digital read-out,
- Weight 5kg
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
B102795 |
|
Flowatch
One meter measures both liquids
and gases
- Two different impellers
- Measures water flow in rivers, streams,
irrigation canals, ocean flows, sewage flows
- Measures air flow in ventilation shafts,
air conditioning conduits, chimney flues and air duct controls.
- Contains a magnetic material in the
propeller for providing a digital readout
- Measures fluid speed in mph, km/h, m/sec
and knots
|
|
|
|
|
|
Rental Rates |
|
|
|
|
BS500 |
|
Stainless
Steel Bomb Sampler
For discrete sampling at depth
- Stainless Steel construction.
- Sampler fills when contact is made with a hard surface OR by
pulling up on the line at a specific depth.
- Unit completely sealed until activated
- Comes with 50m ropes
- 63mm x 254mm (500ml)
|
|
|
|
|
|
Rental Rates |
|
|
|
|
WGS3 |
|
Sub
Surface Grab Sampler III
Sampling in hard to reach spots
- Accurate remote sampling of streams, rivers, manholes and
hard to reach areas.
- 3.6m extended reach (with the extra 1.8m extension).
- Stainless Steel rod construction.
- 1000mL sample bottle.
- Wide mouth for sampling sludge.
|
|
|
|
|
|
Rental Rates |
|
|
|
|
VDS |
|
Van Dorn
Style Bottle
Simple discrete sampling
- 1L water sample
- 20m line
- Trigger-release at desired depth seals the
sample chamber
- Rapid descent, minimal depth
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
WPP |
|
Petite
Ponar
Bottom Sampling Dredge
- For sampling hard bottoms such as sands, gravel and clay.
- Self-tripping: center-hinged jaws and spring-loaded pin
which release when impacting the bottom.
- Stainless Steel construction.
- 2.4L sample volume.
- 11 kg
- Comes with a 18m rope
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
WHC |
|
Wildco
Hand Corer
Sediment Hand Corer
- For sampling sediment at the bottom of rivers, lakes,
trenches, etc.
- In shallow waters, sampler can be pushed into sediment.
- In deeper waters, sampler can be dropped by attaching a
line.
- Corer takes 50mm diameter x 500mm long sample.
- Stainless Steel construction
- Available with 6m of extensions
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
PSDH5010C |
|
Piston
Sampler
Sampling sludges
off the bottom of a body of water
The Piston Sampler
is a 1.2m long tube designed to be pushed into the mud or sediment by
hand. As the sampler is pushed down, the operator pulls back on the piston
rod. This sucks the sediment up into the barrel, retaining its integrity
- Easy to operate in the field
- Core catcher prevents sediment loss
- Stainless Steel Sampler, Aluminium
extensions
- 5kg in weight
- 50mm OD, 46.8 mm ID, 1.2m long
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
